Skip to main content
Construction professional overlooking erection site

How Steel Detailing Software Solves 10 Common Field Issues

Unexpected changes mean unexpected costs

Many factors affect a steel connection in the real world that may be hard to visualize on paper or even in a 3D model. This is especially true with erection, where external factors come into play such as clearance for tools or beam placement. 

And yet erection is where issues and conflicts cost the most—as the industry adage goes, errors cost $10 for a detailer to fix, $100 for the fabricator, and $1000 for the erector.  

Many software solutions still depend on the structural steel detailer to examine the complete node, consider conflicts that might occur during erection, and make tedious adjustments on each member in the model or drawing. 

But SDS/2’s automated connection design is built with the end goal in mind—a completed project. It is the only steel detailing software with erectability intelligence, considering the complete node in its connection design calculations and reducing the potential for human error when it comes to identifying job site complications.

 

A Comprehensive Software for Erectability and Constructability 

Below are ten common field issues that SDS/2 automatically checks and adjusts for as you generate your model and drawings. Some functions—in particular, those built on AISC, CISC, or OSHA specifications—run by default with SDS/2’s automated connection design functionality. But many can also be controlled and customized with additional setup options according to fabricator and erector preference.

  1. Insufficient Bolt Clearance: Specifications for bolt clearance are provided by the AISC and are encountered on nearly every construction project. SDS/2’s connection design adheres to these standards by default, but you can also go further and control for both hex head and tension control bolts, as well as large or small tension control tools.
     
  2. OSHA safety connections: Safety Connections can also be generating automatically according to AISC and OSHA requirements. These allow bolts to be installed for one beam until the opposing beam and all shared bolts can be installed. 

      OSHA Safety Connections
     
  3. Erection aids: Similarly, erection holes are added to the model where bolts will be needed to hold braces in place while they are welded in the field.
     
  4. Inadequate framing clearance: Placing shear tabs on opposite ends sides of beams makes the erection process easier, allowing erectors to swing beams into position without having to clear both shear plates.  

      Erection bolts
     
  5. Incorrect material orientation: With SDS/2, you can automatically design symmetrical shear plates with holes centered on the plate, making it impossible for fabricators or erectors to install the plate backwards. 
     
  6. Conflicts with opposing connections: With offset beam-to-beam connections, SDS/2 can adjust for larger angle sizes on shared connections to avoid conflicts with opposing bolts. 


    An offset beam-to-beam connection in SDS/2
     
  7. Inadequate connection clearance: To ensure a smooth erection process, SDS/2 automatically copes flanges for various conditions, including drop down installation, flange thinning on narrower columns, and bolt clashes.
     
  8. Tool clearance: Additionally, SDS/2 will extend shear plates past the flange to create clearance for tension control tools and for ease of erection where stiffeners are required because of moment connections. 


    Extending shear plates past the flange for additional clearance
     
  9. Shank out: Even something as particular as adding washers to prevent shank out can be handled automatically in SDS/2. 
     
  10. Over-designed connections: Expanded bolt spacing is a bonus feature for both fabricators and erectors. Running connection optimization in SDS/2, you can eliminate unnecessary bolts, which means fewer holes to drill in the fabrication shop and fewer bolts to install in the field. 

 

Making these and similar adjustments in the field could require either costly rework for the fabricator or improvised, labor-intensive solutions in the field that can cause delays, risk worker safety, and even jeopardize the integrity of the project.

So why risk it? While we applaud the keen and insightful eyes of our detailers, automation makes costly errors easily avoidable, bringing an extra layer of accuracy and security to the whole project.

Schedule Your Free Demo with SDS/2 Today  >>

 

Share this article:       

 

RELATED ARTICLES


How SDS/2’s Automated Connection Design Can Streamline Project Workflows

In a traditional project workflow, steel connections are often the cause of many RFIs and back-and-forth communication throughout the project lifecycle. SDS/2’s can mitigate many of these issues by streamlining the detailing process and automated intelligent connection design.
 


5 New Detailing Tools in SDS/2 2020 to Boost Your Productivity

At SDS/2 we are continuously learning from our customers and developing new tools and features to help you succeed. The SDS/2 2020 update introduced several new tools to improve your user experience, boost your productivity, and reduce the potential for errors in your workflow. Here’s a rundown of the top 5 value-added tools you should be taking advantage of in SDS/2 2020.


Maximize Your ROI With SDS/2 Online Training & Certification

Investing in new skill development has never been easier. With SDS/2’s new certification program, detailers can complete SDS/2 basic training online for free, and earn official certifications to easily validate and define their abilities, highlight their accomplishments and commitment to growth, and visually market their skills.